Lightbeam Setup Guide 2025
The first step in connecting your lightbeam will be to connect to its wi-fi network, When the lightbeam it first turned on it will begin broadcasting a wi-fi network you can join. First join the network and then go onto a web browser and go to
http://192.168.172.1
Initial setup guide
Setup the username and password to be
username: admin
password: Zb942gn5Then go into Wireless settings
- ensure the SSID is set to Beamspeed
- set the WPA2 Security to Enterprise
- set WPA2 Password to Gila2481
- leave WPA2 Anonymous Identify Blank
upload the configuration file
the next step will be to upload the config file which sets up the networks and configuration of the device.
Here is the config file
upload the config file under System then down at the bottom click on Upload Configuration
Now the Final step will be to upgrade the firmware of the Lightbeam, here is the link to download the newest firmware.
Upload the firmware under System -> Upload Firmware
